100Base-FX <> 10/100Base-TX LFP Media Converter
TECHNICAL SPECIFICATIONS
|
|
Model: FE-C130C / FE-C130T / FE-C130SC.S20 / FE-C130SC.S400 / FE-C130SC.S60 |
|
|
Standards: IEEE 802.3u 100Base-FX, 10/100Base-TX |
|
|
Connectors:
|
Model # |
Connector A |
Connector B |
USB Port |
|
FE-C130C |
Multi-Mode Duplex-SC, 1310nm |
RJ-45 (auto MDI/MDI-X selection) |
Type-B for optional self-powered USB cable |
|
FE-C130T |
Multi-Mode Duplex-ST, 1310nm |
|
FE-C130M |
Multi-Mode MT-RJ, 1310nm |
|
FE-C130SC.S20 |
Single-Mode Duplex-SC, 1310nm |
|
FE-C130SC.S40 |
Single-Mode Duplex-SC, 1310nm |
|
FE-C130SC.S60 |
Single-Mode Duplex-SC, 1310nm |
|
|
|
dBm:
|
Model # |
Connector |
Max TX Pwr |
Min TX Pwr |
Sensitivity |
Power Budget |
|
FE-C130C |
MM Duplex-SC |
-14 dBm |
-19 dBm |
-30 dBm |
11 dB |
|
FE-C130T |
MM Duplex-ST |
-14 dBm |
-19 dBm |
-30 dBm |
11 dB |
|
FE-C130M |
MM MT-RJ |
-14 dBm |
-19 dBm |
-30 dBm |
11 dB |
|
FE-C130C20 |
SM-20 Duplex-SC |
-8 dBm |
-15 dBm |
-31 dBm |
16 dB |
|
FE-C130C40 |
SM-40 Duplex-SC |
-2 dBm |
-8 dBm |
-34 dBm |
26 dB |
|
FE-C130C60 |
SM-60 Duplex-SC |
0 dBm |
-5 dBm |
-34 dBm |
29 dB |
|
|
|
Data Transfer Rate (Mbps):
100 for FX port
Auto-negotiation 10/100, Force 100, or Force 10 for TX port selectable by DIP-Switch (S1-Bit1 and S1-Bit2) |
|
|
Duplex Mode:
Full or Half for FX port selectable by DIP-Switch (S1-Bit5)
Auto-sensing Full/Half, Force Full, or Force Half for TX port selectable by DIP-Switch (S1-Bit3) |
|
|
MAC Address Table: 2k |
|
|
Buffer Memory: 384K |
|
|
Cable/Max Distance:
Category 5 UTP, up to 100 m
50/125, 62.5/125, or 100/140µm Multi-Mode fiber, up to 2 km
8.3/125, 8.7/125, 9/125, or 10/125µm Single-Mode fiber, up to 20~60 km (model dependent)
Type-B to Type-A USB cable, up to 5 m |
|
|
LEDs:
|
|
LED |
Color |
Function Description |
|
Unit |
POWER |
Green |
Lit when 5V power ON |
|
FX Port |
FX LNK/ACT |
Green |
Lit when both fiber & TP connection are good
Blink when fiber data is present |
|
|
FX FDX/COL |
Amber |
Lit when full-duplex mode is active
OFF when half-duplex mode is active
Blink when collision is receiving |
|
TX Port |
TX LNK/ACT |
Green |
Lit when TP connection is good
Blink when TP data is present |
|
|
TX 100 |
Green |
Lit when TP speed is 100Mbps
OFF when TP speed is 10Mbps |
|
|
|
Power Requirement:
1A@+5V DC from AC-DC Adapter, or
0.5A@+5V DC from USB Port via a USB cable (Sold Separately) |
|
|
Operating Temperature: 0° to 50° C |
|
|
Humidity: 5% to 90% |
|
|
Dimension: 26.2 x 70.3 x 94 mm (H x W x D) |
|
|
EMI Rating: FCC Class A, CE Mark |
ADDITIONAL FEATURES
|
|
Link Fault Pass-Through (LFP):
|
LFP function only takes effect as S1-Bit4 is enabled. Disable S1-Bit4 will turn this media converter into a general one. The LFP function works only when both two converters own this capability in pairs. Furthermore, both LFP converters should be supplied only by the same manufacturer/vendor. The connection coming from LFP converters with odd models or non-LFP converters will cease the LFP function. For example:
|
|
|
|
USB Self-powered:
|
With the optional USB cable (sold separately), power can be drawn directly from your notebook's or desktop's USB port
without using an external power adapter. |
|
