100Base-FX <> 10/100Base-TX LFP Media Converter
TECHNICAL SPECIFICATIONS
|
Model: FE-C130C / FE-C130T / FE-C130SC.S20 / FE-C130SC.S400 / FE-C130SC.S60
|
|
Standards: IEEE 802.3u 100Base-FX, 10/100Base-TX
|
|
Connectors:
Model #
|
Connector A
|
Connector B
|
USB
Port
|
FE-C130C |
Multi-Mode Duplex-SC, 1310nm
|
RJ-45 (auto MDI/MDI-X selection)
|
Type-B for optional self-powered USB cable
|
FE-C130T |
Multi-Mode Duplex-ST, 1310nm
|
FE-C130M
|
Multi-Mode MT-RJ, 1310nm
|
FE-C130SC.S20 |
Single-Mode Duplex-SC, 1310nm
|
FE-C130SC.S40 |
Single-Mode Duplex-SC, 1310nm
|
FE-C130SC.S60 |
Single-Mode Duplex-SC, 1310nm
|
|
|
dBm:
Model #
|
Connector
|
Max TX Pwr
|
Min
TX Pwr
|
Sensitivity
|
Power Budget
|
FE-C130C
|
MM Duplex-SC
|
-14 dBm
|
-19 dBm
|
-30 dBm
|
11 dB
|
FE-C130T
|
MM Duplex-ST
|
-14 dBm
|
-19 dBm
|
-30 dBm
|
11 dB
|
FE-C130M
|
MM MT-RJ
|
-14 dBm
|
-19 dBm
|
-30 dBm
|
11 dB
|
FE-C130C20
|
SM-20 Duplex-SC
|
-8 dBm
|
-15 dBm
|
-31 dBm
|
16 dB
|
FE-C130C40
|
SM-40 Duplex-SC
|
-2 dBm
|
-8 dBm
|
-34 dBm
|
26 dB
|
FE-C130C60
|
SM-60 Duplex-SC
|
0 dBm
|
-5 dBm
|
-34 dBm
|
29 dB
|
|
|
Data Transfer Rate (Mbps):
100 for FX port
Auto-negotiation 10/100, Force 100, or Force 10 for TX port selectable by DIP-Switch (S1-Bit1 and S1-Bit2)
|
|
Duplex Mode:
Full or Half for FX port selectable by DIP-Switch (S1-Bit5)
Auto-sensing Full/Half, Force Full, or Force Half for TX port selectable by DIP-Switch (S1-Bit3)
|
|
MAC Address Table: 2k
|
|
Buffer Memory: 384K
|
|
Cable/Max Distance:
Category 5 UTP, up to 100 m
50/125, 62.5/125, or 100/140µm Multi-Mode fiber, up to 2 km
8.3/125, 8.7/125, 9/125, or 10/125µm Single-Mode fiber, up to 20~60 km (model dependent)
Type-B to Type-A USB cable, up to 5 m
|
|
LEDs:
|
LED
|
Color
|
Function Description
|
Unit
|
POWER
|
Green
|
Lit when 5V power ON
|
FX Port
|
FX LNK/ACT
|
Green
|
Lit when both fiber & TP connection are good
Blink when fiber data is present
|
|
FX FDX/COL
|
Amber
|
Lit when full-duplex mode is active
OFF when half-duplex mode is active
Blink when collision is receiving
|
TX Port
|
TX LNK/ACT
|
Green
|
Lit when TP connection is good
Blink when TP data is present
|
|
TX 100
|
Green
|
Lit when TP speed is 100Mbps
OFF when TP speed is 10Mbps
|
|
|
Power Requirement:
1A@+5V DC from AC-DC Adapter, or
0.5A@+5V DC from
USB
Port via a USB cable (Sold Separately)
|
|
Operating Temperature: 0° to 50° C
|
|
Humidity: 5% to 90%
|
|
Dimension: 26.2 x 70.3 x 94 mm (H x W x D)
|
|
EMI Rating: FCC Class A, CE Mark
|
ADDITIONAL FEATURES
|
Link Fault Pass-Through (LFP):
LFP function only takes effect as S1-Bit4 is enabled. Disable S1-Bit4 will turn this media converter into a general one. The LFP function works only when both two converters own this capability in pairs. Furthermore, both LFP converters should be supplied only by the same manufacturer/vendor. The connection coming from LFP converters with odd models or non-LFP converters will cease the LFP function. For example:
|
|
|
USB Self-powered:
With the optional USB cable (sold separately), power can be drawn directly from your notebook's or desktop's USB port
without using an external power adapter.
|
|